Fabric Conveyor Belt Facebook Google

• Customization: Available
• Type: Nn100-Nn2000
• Material: Rubber
• Model NO.: Fabric conveyor belt
• Feature: Oil-Resistant, Acid And Alkali Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Name: Nn Conveyor Belt
• Width Range: 500-6000mm
• Length Range: 100-1000m
• Top Rubber: 3/4.5/6mm
• Bottom Rubber: 1.5/2/3mm
• Certificate: ISO9001
• Standard: GB,Rma,Sans,as
• Transport Package: Water-Proof and UV-Proof Cloth All Side
• Trademark: HYRUBBERS
• Origin: China
• HS Code: 401012
• Production Capacity: 20000m/Month

Product Description

1. Use:
Used in coal mines, ports, metallurgy, electric power, chemicals Conveying material, etc.
2. Characteristics:
Tensile strength; Good shock resistance; Long life, small; Use elongation; Into slot of;
3. Structure:
Take consists of cover glue, glue, glue side middle longitudinal spacing according to certainarranged of wire rope.


The heat resistant conveyor belt is made of the multilayer rubber cotton canvas 'polyester cotton' covered with the high temperature or heat resistant rubbers, which are bonded through high temperature vulcanization, it is applicable to conveying of the coke, cement, clinker and hot casting etc. 
 1,The heat resistance conveyor belt's specification shall be identical with that of the conventional conveyor belt.
 2,The heat resistance conveyor belt shall be in accordance with HG2297-92.
 3,The heat resistant conveyor belt contains three types.
Type I; it is able to resist the test temperature of no more than 100ºC, the max. short-time operating temperature is 150ºC,the symbol is T1.
Type II; it is able to resist the test temperature of no more than 125ºC, the max. short-time operating temperature is 170ºC,the symbol is T2.
Type III; it is able to resist the test temperature of no more than 150ºC, the max. short-time operating temperature is 200ºC,the symbol is T3.
Type IV; it is able to resist the test temperature of no more than 175ºC, the max. short-time operating temperature is 230ºC,the symbol is T4.
2,The heat resistance conveyor belt physical property of the cover rubber after heat test shall conform to the values specified in the table.

Item		type
		type I		type II			type III
		variable range
Hardness	Difference before and after ageing (IRHD)				±20
	Max. Value after ageing (IRHD)	85
Tensile strength	variable rate in performance   ≤	25	30			40
	Min. value after ageing Mpa	12	10			5
Rate of elongation at break	variable rate in performance% ≤	50				55
	Min. value after ageing	200				180

3,The heat resistance conveyor belt abrasive wear of the cover rubber

Type   Item level	Abrasive wear
	type I	type II	type III
First quality	0.8	1.0	1.0
accepts	1.0	1.2	1.2

4,The heat resistance conveyor belt layer to layer adhesion strength

Item	interlayer of cloth	cover layer and cloth interlayer
		Thickness of the cover layer≤1.5mm	Thickness of the cover layer>1.5mm
The average value of the longitudinal specimen shall be no less than	3.0	2.2	2.6
The peak value of the longitudinal specimen	2.0	1.6	2.0